Unable to flash iPhone 6

For all questions & answers about 3uTools and iOS

Moderators: Lily Lee, jc_3u, Moderators

xavitel
Posts: 2
Joined: 02 Jan 2018 03:53
like: 0

Unable to flash iPhone 6

Postby xavitel » 02 Jan 2018 04:03

Hi team,

Happy new year! I was trying to flash an iPhone 6 using u3 but always stucks in the 20% "Creating filesystem", then it shows Error -1: Unable to connect to the iDevice. I tried at least 20 times with 2 different cables, 2 different PCs, using iTunes, etc... Do you think the iPhone is bricked?

Thanks

Grace Liu
Posts: 537
Joined: 20 Oct 2016 09:33
like: 65

Re: Unable to flash iPhone 6

Postby Grace Liu » 02 Jan 2018 09:39

xavitel wrote:Hi team,

Happy new year! I was trying to flash an iPhone 6 using u3 but always stucks in the 20% "Creating filesystem", then it shows Error -1: Unable to connect to the iDevice. I tried at least 20 times with 2 different cables, 2 different PCs, using iTunes, etc... Do you think the iPhone is bricked?

Thanks


Hello, Error -1 may be caused by connection between the pc and the device, network and hardware problem. And if the same error exists after you try many times, it could be the hardware problem. You are suggested to get a repairman to check your device.

Hapoer
Posts: 9
Joined: 25 Dec 2017 18:30
like: 1

Re: Unable to flash iPhone 6

Postby Hapoer » 02 Jan 2018 15:59

I can tell it's a hardware problem as I had a similar problem

xavitel
Posts: 2
Joined: 02 Jan 2018 03:53
like: 0

Re: Unable to flash iPhone 6

Postby xavitel » 02 Jan 2018 19:59

Thank you guys, do you think it worth it to try to repair it?

Grace Liu
Posts: 537
Joined: 20 Oct 2016 09:33
like: 65

Re: Unable to flash iPhone 6

Postby Grace Liu » 03 Jan 2018 14:53

xavitel wrote:Thank you guys, do you think it worth it to try to repair it?

Well, it depends on you :lol: :lol:
But in my opinion, after hardware repair, the device would be not as good as before :)


Return to “Help & Support”